UMT Qc Fire Tool V11.1 Latest Version (2024)

UMT Qc Fire Tool V11.1 For Android Flashing and Unlocking

Introduction

UMT (Universal Multi Tool) QcFire is a module/tool in the UMT box/dongle system specifically designed to work with Qualcomm-based Android devices. Version v11.1 is one of its more recent stable releases (late 2024) bringing support for newer device models and additional functionality. Its aim is to allow repair shops technicians and advanced users to flash firmware unlock reset security features repair IMEI remove FRP etc. on devices which use Qualcomm chipsets.

Features of UMT QcFire v11.1

From the release notes and community reports here are the features of QcFire v11.1: 

• Read / Write Firmware (flash stock firmware) 
• Backup / Restore QCN (Qualcomm Calibration Network file)
• IMEI Repair in FTM/Diag + Flash Mode 
• Backup / Reset / Restore Security (EFS partitions etc.) 
• Reset FRP (Factory Reset Protection / Google account lock) 
• Format UserData (wipe user data partition) 
• Read Pattern Lock (Android < 6.0, on un-encrypted devices only) 
• Reset Locks (PIN / Password / Pattern without data loss on un-encrypted devices only) 
• Enable Diag Mode (diagnostic mode) – may require OEM Unlock sometimes may not work on bootloader locked devices. 
• Reboot to EDL (Emergency Download Mode) from Fastboot mode
• Many Xiaomi-specific functions: Reset/Disable Mi Account Factory Reset in sideload mode IMEI repair including for RSA protected devices Bootloader unlock etc.
• Vivo specific functions: e.g. Lock reset even for encrypted userdata etc. 
• Samsung functions: MDM unlock Lost Mode reset Unbrick/dead boot repair bypassing security features etc. 
• Other brand support: Nokia nb0 firmware flashing Huawei ID reset etc. 

Also the update includes new device support (new models of Samsung Vivo, etc.) updated loader database (hashes/IDs) and improved handling of locked/encrypted devices in certain circumstances. 

Read Also: Sam Flash Tool V3.5 For Samsung Mobile (2024)

How to Use UMT QcFire v11.1

Here’s a general procedure. Specific steps depend on the brand/model of the phone and whether it is locked encrypted etc. Use carefully.

Requirements / Preparations

• UMT hardware (UMT Box/Dongle) properly activated with QcFire module.
• PC with Windows USB drivers installed (Qualcomm USB drivers HS-USB QDLoader etc.) 
• The correct firmware / programmer files for your specific device (Qualcomm firehose / rawprogram files etc.).
• USB cable.
• Device model info and whether bootloader is locked OEM unlock is enabled whether EDL/Diag access is possible.

Launching the Tool

• Connect the UMT box/dongle to the PC.
• Open UMT (UMT/QcFire module).
• Select the target device brand/model.

Putting Device into Required Mode

• Many operations require the phone to be in EDL (Emergency Download) mode. This is often done by powering off the device using key combinations (Vol+ + Vol- etc) or use of tested cable test point etc.
• For some tasks Fastboot or Diag mode may be needed.

Selecting Operation

• From the list of features: firmware flash IMEI repair FRP reset lock reset etc.
• If flashing choose single or multi-program mode load the required programmer file(s) (e.g. rawprogram and patch files) or full firmware. 
• For other operations (e.g. FRP reset Mi account reset etc.) navigate to that function in the software.

Executing

• Once everything is set click the relevant button (“Flash” “Repair”, “Reset”, etc.).
• The tool will detect the device in correct mode (EDL or as required) and begin the chosen operation.
• Wait until it shows completion (“Operation Finished” etc.).

Post-operation

• Disconnect device safely.
• Power on the device.
• Verify that operation was successful (e.g. firmware loaded properly lock removed IMEI repaired etc.).

Precautions

• Always backup data (if possible).
• Use correct firmware for that specific model to avoid bricking.
• Be mindful of legal and warranty issues (IMEI repair etc.).

Conclusion

UMT QcFire v11.1 is a powerful tool for technicians working with Qualcomm-based devices. It combines a wide range of features: flashing unlocking FRP bypass IMEI repair etc. with support for many manufacturers (Samsung Xiaomi, Vivo etc.). The 2024 update (v11.1) brings more device support and improved handling of locked/encrypted devices making it more useful. However with great power comes responsibility: misuse (wrong firmware illegal IMEI changes etc.) can lead to bricked phones or legal consequences. Any technician using QcFire should ensure they have the right tools permissions backups and understand the risks.

Download Link: Click Here