UMT QcFire Tool V11.3 Latest Version (2024)

UMT QcFire Tool V11.3 Latest Version (2024)

Introduction

UMT QcFire v11.3 is a version of the UMT (Ultimate Multi Tool) suite designed for servicing Qualcomm-chipset Android devices. It provides various functions like firmware flashing resetting locks (FRP, PIN, pattern) repairing IMEI restoring security partitions and more. The tool is intended for professional technicians and service centers or advanced users who have the required hardware (dongle / box) and rights.

This version (v11.3, released in 2024) brings new device support and enhancements over earlier versions making tasks easier for newer Qualcomm devices especially those with tighter security.

Features

Here are the main features of UMT QcFire v11.3 according to the release notes:

• Read / write firmware. 
• Backup / restore QCN (Qualcomm Calibration Network file). 
• IMEI repair in FTM/Diag & Flash mode. 
• Backup reset restore security (EFS partition). 
• Reset FRP (Factory Reset Protection). 
• Format user data partition. 
• Read pattern lock (for Android < 6.0 un-encrypted devices). 
• Reset locks (PIN password pattern) without data loss (on un-encrypted devices). 
• Enable Diag mode (requires OEM unlock may not work if bootloader locked). 
• Reboot to EDL (Emergency Download) from Fastboot. 
• Various Xiaomi, Vivo, Motorola Nokia Oppo specific services: Mi account reset/disable bootloader unlock (some) repair etc. 
• Forensic functions (read contacts / messages in EDL mode). 
• Enhanced support for newer devices: added models like Moto G53 Oppo A96 many Samsung devices with higher BITs etc. 
• Improved internal loader database. 
• “Keep Boot Alive” option: allows keeping the device booted and doing multiple operations without rebooting etc. 

These features make it a powerful tool for device repair / service tasks on Qualcomm phones especially where FRP locked bootloaders corrupted firmware / partitions etc are involved.

Read Also: ADB Partition Manager Tool (2024)

How To Use UMT QcFire

Here is a general guide / workflow on using UMT QcFire. The exact steps may vary slightly depending on your hardware (which UMT box/dongle you have) device model / brand and whether bootloader/EDL access is available. Also always ensure you have backups and the correct firmware/loader files.

Prerequisites:

• UMT dongle / box with QcFire module activated.
• PC (Windows) with correct USB drivers installed (Qualcomm QDLoader/HS-USB etc.).
• Firmware files / loaders / rawprogram files appropriate for the specific Qualcomm device.
• USB cable stable power the device to service.

General Steps:

1. Install drivers on the PC so that the Qualcomm device is recognized in the required modes (e.g., EDL mode).

Connect / Put device into EDL mode (Emergency Download mode). How to do this depends on device:

• Some have hardware test points.
• Some require pressing specific key combinations (e.g., Vol+ + Vol−, or using a special EDL cable) while connecting the USB.
• Some can be rebooted into EDL via Fastboot or via ADB (if device is still functioning).

1. Open UMT Support Access and launch QcFire module. Make sure the dongle is detected and activated.
2. Select the device / model from within QcFire (sometimes auto-detect or manual selection).

Choose the desired operation e.g.:

• Flash firmware.
• Reset FRP.
• Repair IMEI.
• Backup / restore EFS.
• Reset user data etc.

1. Load required files / firmware / loader: For flashing you may need "program / rawprogram" files patch files loader files etc. Ensure they correspond exactly to your device’s model + version.
2. Configure options if needed e.g. choose which partitions to flash whether to use “Customize” mode “Keep Boot Alive” option etc.
3. Start the operation. The tool will communicate with the device in EDL mode and perform the selected task. Wait until it shows “Operation Finished” or similar confirmation.
4. Reboot the device after operation disconnect from PC. Check whether the issue is resolved.
5. Post-operation checks: Ensure IMEI / network works (if repaired) that FRP is removed if that was intended check that firmware version is correct.

Conclusion

UMT QcFire v11.3 is quite a capable tool for Qualcomm-based Android device servicing. It brings many enhancements supports newer devices improves loader databases and adds conveniences like “Keep Boot Alive”, which can speed up workflows for technicians.

However with great power comes responsibility: improper use (flashing wrong firmware violating legal restrictions unauthorized unlocking / bypass of device security) can lead to permanent damage or legal issues.

If you are a device repair technician or someone with sufficient technical knowledge the tool is very useful. If you're less experienced you should proceed with caution ensure backups use correct files and understand local laws and manufacturer policies.

Download Link: Click Here